Drip test device, commonly known as ipx1-2 drip test device, drip test bench and rainproof test equipment

1. This test equipment is suitable for testing the ability of electrical and electronic products to remain intact when they may suffer from vertical precipitation (from natural rainfall, infiltration or condensate) during transportation, storage or use.

2. It is mainly used to test the physical and other related properties of electrical products, electronic products, lamps, electric cabinets, electrical components, automobiles, motorcycles and their parts under the simulated rainy climate. After the test, it can judge whether the performance of the products can meet the requirements through identification, so as to provide reference for product design, improvement Identification and delivery inspection.

3. Ipx1 means to prevent the intrusion of dripping water and will not cause harmful effects on Electrical and electronic products.

4. Ipx2 means that dripping water can still be prevented when the inclination is 15 °, and dripping water will not cause harmful effects on Electrical and electronic products.

5. Ipx1 vertical drip test is to place the sample on the rotating sample table at 1R / min according to the normal working position of the sample, the distance from the top of the sample to the drip port is not more than 200mm, and the amount of drip is 1-1.5mm/min; Test duration: 10min.

6. Ipx2 inclined 15 ° drip test is to make one surface of the sample form a 15 ° angle with the vertical line, and the distance from the top of the sample to the drip port is not more than 200mm. After each surface is tested, change another surface for four times; The dripping amount is 3-3.5mm/min; Test duration: 4 × 2.5min (10min in total).

1. Totally enclosed drip tank and water supply system;

2. The lifting range of drip tank: 200mm ~ 2500mm, and the upper and lower proximity switch limits ensure safe and reliable lifting;

3. Drip amount: ipx1: 1 ~ 1.5mm/min (pinhole d = 0.4mm), ipx2: 3 ~ 3.5mm/min (pinhole d = 0.8mm);

4. Sample table: total height 500mm;

5. Turntable: Φ 600mm can be tilted by 15 °;

6. Maximum bearing weight of rotary table: 50kg;

7. Rotation rate: ipx1: 1 RPM / min (reciprocating);

8. Drip nozzle spacing: 20mm (stainless steel drip nozzle can be disassembled for easy cleaning and replacement);

9. Control system: the button switch controller, the controller and flowmeter accurately control the dripping flow rate, the speed regulating switch controls the rotation of the rotary table, manually adjust the tilt angle (15 °), and manually adjust the dwell time of the rotary table;

10. Material of water storage tank: stainless steel, with filtering device (it should be cleaned frequently during use);

11. Overall dimension (w * D * h): 1000x1500x2300mm;

12. Power supply: 380V50Hz

13. Total weight: 180kg.